Removing Header from Feeder House

CAUTION: Do not leave drive shafts on combine. Personal injury or machine damage may occur if feeder house is accidentally engaged.

IMPORTANT: Drive shafts with U-joints are used on the left-hand and right-hand sides of all approved headers.

NOTE: For complete attaching and detaching procedures refer to the header Operator's Manual.

Disconnect telescoping drive shafts from feeder house at the quick disconnect coupler (A) on left and right sides.

Place telescoping drive shafts in storage position (B).

A-Quick Disconnect Coupler
B-Storage Position

AG,OUO6075,305 -19-14AUG00-1/1