Reel Lift/Reel Fore and Aft Switch
The reel position switch controls position, raising and lowering of reel.
To adjust reel position (A), the road transport disconnect switch (B) must be in field position.
Push and hold bottom of switch to raise reel. Push and hold top of switch to lower reel.
Push and hold left side of switch to move reel forward. Push and hold right side of switch to move reel rearward.
When equipped with variable speed feeder house and corn head, or row-crop head, this switch controls front end speed and corn head adjustable deck spacing (if equipped). Push and hold bottom of switch to increase speed. Push top of switch to reduce speed. Engine and header must be running to adjust speed.
If the ACTIVE HEADER CONTROL
system or automatic auger swing are operating when this switch is used, the reel or the variable speed feeder house response may vary.
|