Adjustable Deck Plate Position (Optional on 90 Series Corn Heads)

NOTE: To calibrate adjustable deck plates, (See "CALIBRATION PROCEDURES" in this manual).

The reel fore/aft switch (A) on the multi-function handle allows the operator to open and close the adjustable deck plates on 90 Series Corn heads.

The deck plates can be moved only when:

  • engine is running,
  • road transport disconnect switch (B) is in the field position

Pressing the reel forward switch (C) opens the deck plates and pressing the reel aft switch (D) closes the deck plates.

The deck plate position icon (E) and plate opening (F) (a decimal value between 0 and 9) will be displayed in the upper left-hand side of the display. Zero will be displayed with the deck plates at minimum position and 9 will be displayed with the deck plates opened to maximum position.


A-Reel fore/Aft Switch
B-Road Transport Disconnect Switch
C-Reel Forward Switch
D-Reel Aft Switch
E-Deck Plate Position Icon
F-Deck Plate Opening

H64606
H52725

HX,AG,SF6840 -19-06MAY99-1/1