When to Calibrate
The following calibration procedures must be performed before first use or when replacing any of the sensors.
-
Concave Sensor Zero Calibration - conc
-
Header Calibration - hdr
-
CONTOURMASTER
™
Angle Sensor Calibration - tilt (Optional)
-
Hydraulic Adjustable Deck Plate (optional) Sensor Calibration - dEc
NOTE:
The condition causing the error must be corrected before the calibration can be continued.
If any errors occur during the calibration procedures, error codes will be displayed on the triple display tachometer. (See "ERROR CODES").
|