Light Switches
NOTE:
The combine is equipped with exit lighting. Two headlamps will remain on for 90 seconds after the lights are turned off and the key removed.
-
(A) Dimmer, for all cab interior lights.
-
(B) Hazard: Warning (flashing) lights, headlights (if engine is running) and turn signals when turn signal lever is used.
-
(C) Road: Warning (flashing) and four head lights, instrument lights, tail lights and turn signals when turn signal lever is used.
-
(D) Field: Grain tank and header lights (field position), auxiliary field lights and side finder lights on.
-
(E) Work:
-
Position 1: Grain tank light only
-
Position 2: Grain tank and header lights, side finder lights and auger tube light.
The auger light will be turned on only when the auger is swung out at least 10 degrees.
|
A-Dimmer for Cab Interior Lights
B-Hazard Lights
C-Road Lights
D-Field Lights
E-Work Lights
|
