Coolant Heater
Before connecting heater to power source, be sure that element is immersed in coolant. NEVER energize heater in air. Doing so can cause element sheath to burst causing personal injury. The 1000-watt 115-volt coolant heater (A) mounts in the freeze plug opening on the front side of the engine on 9550 and 9650 combines and on the rear side of the engine on 9450 combines. By warming engine coolant, the heater reduces oil drag, eases starting, and shortens warm up time.
|
|
CAUTION:
To avoid shock or hazardous operation, always use a three wire heavy duty electrical cord equipped with three wire connectors. If a two to three contact adapter is used at the wall receptacle, always connect green wire to a good ground.
HX,AG,SF6905 -19-02MAR99-1/1 |