High-Range Direct Drive (480-980 RPM)

CAUTION: Shut off engine, remove key, and set parking brake.

Align notched area of wheel (A) to one of three holes in gear case sheave (B). Notch area may have to be rotated 360° up to three times to align holes in cylinder drive sheave and speed pickup casting (C).

Insert pin (D) in hole and into speed pickup casting.

Insert safety pin (E) through pin and on both sides of lip surrounding hole. Lock safety pin.

A-Wheel
B-Gear Case Sheave
C-Speed Pickup Casting
D-Pin
E-Safety Pin

HX,AG,SF6969 -19-09OCT91-1/1