Low Range (Reduced-Drive) (240-480 RPM)

CAUTION: Shut off engine, remove key and set parking brake.

Pull down on arm (A) and align lug (B) on torque wheel with arm (A).

Insert pin (C) through hole in arm and lug as far as it will go.

Insert safety pin (D) through pin and on both sides of tabs on arm. Lock safety pin.

Cylinder will now operate in reduced drive at 240-480 rpm (or about 150-250 rpm with a low speed cylinder drive conversion).

A-Arm
B-Lug
C-Pin
D-Safety Pin

HX,AG,SF6970 -19-17MAY99-1/1