Adjusting Tailboard Angle

CAUTION: Shut off engine, remove key, and set parking brake.

With the vanes in their widest position and the tailboard set in its highest position, crop is thrown farthest and widest.

With vanes in the narrow position and the tailboard in its lowest position, crop is thrown minimum distance.

To adjust tailboard angle, loosen nuts (A) and (B) on both sides. Remove bolts (C) from both struts and move tailboard up or down. Replace bolts and tighten nuts.

A-Nut
B-Nut
C-Bolts

HX,AG,SF7011 -19-23NOV98-1/1