Adjusting Knives

causym CAUTION: Engine must be off, key removed and parking brake set.

Knives can be adjusted to any position. Position of knives determines the cut length of straw.

IMPORTANT: Knives must be in the "out" (not cutting) position for corn.

For longer straw, loosen bolt (A) (both sides) and slide knives out. Tighten bolt.

For shorter straw, loosen bolt (A) (both sides) and slide knives in. Tighten bolt.


A-Bolts

H61298

Knife Bolt (Longer Straw)

H61299

Knife Bolt (Shorter Straw)

HX,AG,SF7013 -19-23NOV98-1/1