Grain Tank Full Indicator
Sensor (A) is located inside front left of grain tank. It turns on a blue light on warning display panel and a buzzer until the sensor is de-activated.
The blue light turns on immediately but there is a two second delay between the tripping of the sensor and the buzzer sounding.
Header drive must be on for the buzzer to sound.
CAUTION:
Shut off engine, remove key and set parking brake.
Adjust sensor by moving it up or down in slot on mounting bracket. This adjusts the switch "trip" point. The higher the sensor, the fuller the grain tank will be at the time the buzzer sounds.
If greater grain tank fill is desired, the mounting bracket can be turned over, however, the bracket will be above the extension.
|