1. Conveyor Auger Drive Bearings-Two fittings on 9650 combines.

2. Final Drive Outer Bearings (Both Sides)- When operating in mud and water, grease at 10 hours.

3. Brake Fluid Level (A). Look through cap. Add brake fluid to 6 mm (1/4 in.) from top. Do not let dirt get into brake fluid.

4. Main Hydraulic/Hydrostatic Filter (B). It is not necessary to drain the reservoir to change this filter.

5. Straw Chopper Drive Countershaft Bearings.

6. Straw Chopper Drive Sheave.

7. Hydrostatic Charge Filter (C)- Coat seal on new filter with oil. Hand tighten then tighten 1/2 turn more.

HX,AG,SF7057 -19-22MAR99-1/1