Fuel Filter Replacement (9550 and 9650 Combines)

CAUTION: Always shut off engine, remove key and set parking brake before performing maintenance work on fuel filter.

Change water filter separator before changing this filter. Water filter may be plugged, making fuel filter change unnecessary.

How often filter (A) is changed depends on how clean the fuel is and how it was stored.

To change filter, release spring latches (B).

Pull filter off and push new filter on.

Retain filter with spring latches.

Bleed air from filter after a filter change or when engine has run out of fuel. See "BLEEDING FUEL LINES" and "BLEEDING FUEL FILTERS".

IMPORTANT: Any dirt lodged in groove or hollow center of spring pins (C) can be washed into injection system and will result in damage to injection pump or nozzles.

A-Fuel Filter
B-Spring Latches
C-Spring Pin

HX,AG,SF7082 -19-10MAR99-1/1