Bleeding Engine Fuel Filter (9550 and 9650 Combines)

CAUTION: Always shut off engine, remove key and set parking brake before performing maintenance work on fuel filter.

Air can enter the fuel system when changing the filter or running out of fuel. Air in the system could prevent engine from starting. If engine will not start in a couple attempts, use the following procedure to bleed the filter.

Loosen, but do not remove, filter bleed plug (A).

Loosen primer (B) until it can be pulled upward.

Pump primer until fuel appears at bleed plug.

Turn key on so electric pump can help hand priming.

Tighten bleed plug. Push primer down and tighten.

A-Filter Bleed Plug
B-Primer

HX,AG,SF7085 -19-02MAR99-1/1