Replacing Engine Fan Belt (9650 Combines)

CAUTION: Shut off engine, remove key and set parking brake.

Loosen jam nut (A) and adjustment nut (B).

Push down on spring loaded idler and remove engine fan belt (C) from pulley.

Install new belt by pushing down on spring loaded idler and installing belt onto pulley.

Tighten adjustment nut until gauge (D) aligns with washer.

Tighten jam nut.

A-Jam Nut
B-Adjustment Nut
C-Engine Fan Belt
D-Gauge

HX,AG,SF7091 -19-02MAR99-1/1