Replacing Cleaning Fan Belt

Start engine, engage separator and operate fan to it's fastest speed.

CAUTION: Engine must be off, key removed and parking brake set.

Disengage separator and shut off engine.

Remove quick lock pins (A) from shields.

Slide top shield (B) forward and lower shield (C) rearward.

Disengage locking strap (D) and lower shield (E).

A-Quick-lock Pins
B-Top Shield
C-Lower Shield
D-Locking Strap
E-Lower Shield

HX,AG,SF7139 -19-01MAR99-1/2

Wedge bottom sheave (A) open.

Disconnect front arm (B) and swing out of the way.

Remove belt (C) from upper and lower sheave.

Install new belt.

Reinstall shields.

A-Bottom Sheave
B-Front Arms
C-Belt

HX,AG,SF7139 -19-01MAR99-2/2