Header Flotation Gauge

Lower header to 150 mm (6 in.) above ground. Rotate plastic cover (A) on gauge so right-hand pointer (B) on cover aligns with gauge. Lower header more until pressure is reduced 345 to 1034 kPa (50 to 150 psi) on gauge to determine correct operating range for a given field condition.

For soft ground conditions, use a minimum of "down suspension" or a very light pressure on ground. This will give maximum header suspension with least amount of force. Header will not move below this position or drop down into hollows.

A-Plastic Cover
B-Right Hand Pointer

HX,AG,SF7193 -19-10MAR99-1/1