Cleaning Hydrostatic Oil Cooler

CAUTION: Turn off engine, set parking brake and remove key.

Release latch (A) and open rotary screen door (B).

A-Latch
B-Rotary Screen Door

HX,AG,SF7208 -19-19MAY99-1/2

Pull out condenser/oil cooler (A) to clean.

Clean oil cooler, condenser and radiator.

Clean out lower vacuum duct (B) and duct (C).

IMPORTANT: When using high pressure air or water, be careful of fin damage to coolers. Use a fin comb to straighten bent fins. Bent fins will decrease cooler performance.

Keep fins on condenser straight. After cleaning, close and latch rotary screen door.

A-Oil Cooler
B-Vacuum Duct
C-Duct

HX,AG,SF7208 -19-19MAY99-2/2