Unloading Auger Swing Switch (Black)To swing the auger, the road transport disconnect switch (A) must be in field position. Auger swing control can be either manual or automatic. Press top of switch (B) to swing auger out. Press bottom of switch to swing auger in. For manual control, press the switch down part way and hold until auger reaches the desired position. The auger stops when the switch is released. NOTE: If the auger automatic swing switch is operated while raising or lowering the feeder house, the auger swing cylinder may become "starved" for oil and stop working after two seconds. To complete auger swing press the auger swing switch until the auger has completed swinging. For automatic control, press the switch all the way down and release it. The auger will swing to the full out or full in position without holding the switch. NOTE: The automatic auger swing function will not operate when the unloading auger drive is engaged. |
|
OUO1035,00001FB -19-20SEP00-1/1 |