VISIONTRAK™ Performance Monitor (General Information)The monitor checks grain loss by measuring a representative sample of losses over the cleaning shoe sensors and through the tine separator. A change in loss rate is indicated by the bar graphs (A). The VISIONTRAK ™ Performance Monitor continuously monitors combine performance to enable the operator to use maximum combine capacity. When the operator has adjusted his combine and header to an acceptable loss level, the total bar graph (B) can be set to the center. The VISIONTRAK ™ Performance Monitor can also be used to detect plugged or closed sieves and chaffers. A sudden upward movement of the bar graphs when field conditions are unchanged, can indicate the sieve or chaffer are plugged or closed. When this happens, stop the combine and correct the problem. |
|
|
VISIONTRAK is a trademark of Deere & Company | OUO1035,0000206 -19-20SEP00-1/1 |