Cross Auger Drive Shear Bolt

causym CAUTION: Set parking brake, shut off engine and remove key.

Shear bolt (A) protects the unloading auger system. Three extra bolts (B) are provided to the left of the drive.

Use only a M8 x 60 class 8.8 cap screw as a shear bolt (John Deere part 19M7185).

Coat machined face and pilot shoulder of hub with grease whenever shear bolt is replaced.

IMPORTANT: Do not install a tire inner tube or a sack to end of unloading auger. Any restriction at end of auger can cause damage to the unloading auger system and could cause shear bolt failure.


A-Shear Bolt
B-Extra Bolts

H61366
H61367

OUO1035,00002A1 -19-20SEP00-1/1