Cleaning Element

1. Pat sides of element (A) gently to loosen dirt. Do not tap element against a hard surface.

2. Using a John Deere AR62377 Dry Element Cleaner Gun (B), clean element with compressed air. Hold nozzle next to inner surface, and move up and down pleats.

IMPORTANT: Do not direct air against outside of element, as it might force dirt through to inside.

3. Repeat step 1 and 2 to remove additional dirt.

4. Inspect element before reinstalling.

A-Element
B-John Deere AR62377 Dry Element Cleaner Gun

OUO1035,00002D9 -19-20SEP00-1/1