Diagnostic Trouble Code Priorities
Each Diagnostic Trouble Code (DTC) has a priority. The priority of the DTC is indicated in the way the DTC is displayed to the operator:
Stop Engine Code (1) - The Triple Display tachometer will stop normal function and the DTC will be displayed. This indicates a problem that requires the combine be stopped, the engine turned off immediately and the problem corrected. The Triple Display Tachometer will show the DTC until the problem is resolved. If the problem cannot be resolved, see your John Deere dealer.
Warning Code (2) - The combine can continue to be operated, however, all functions may not function or may not function properly. Continuing to operate the combine will not damage the machine. The problem can be addressed at your convenience. If the problem cannot be resolved, see your John Deere dealer.
NOTE:
Some codes may be activated that are not addressed in this book. These codes are of low severity. Contact your John Deere dealer at your convenience.
|