1. Rear Axle (Both Sides). Power steering outer fitting.

Rear Axle (Both Sides). Power steering inner fitting.

Rear Axle (Both Sides). Tie rod fitting.

2. Final Drive Oil. Fill at hole (A). Check oil level up to within 12 mm (1/2 in.) of bottom of hole at plug (B). (If you can touch oil with your little finger, you do not need to add oil).

3. Transmission. Remove plug (C) and check. Add as needed to within 12 mm (1/2 in.) of bottom of hole.

4. Inspect fire extinguisher by following the maintenance instructions on the fire extinguisher label. Recharge or replace as necessary.

OUO6075,00000D3 -19-21NOV00-1/1