Operating Speeds

Speeds shown are average and can vary from machine to machine. Speeds are rated at high idle with separator engaged, no load.

OUO6075,0000117 -19-29NOV00-1/3

Engine:
  Slow Idle (Separator Off) 9450 1350 rpm
  Slow Idle (Separator Off) 9550 and 9650 1200 rpm
  Mid Speed (Separator Off) 9550 and 9650 1680 rpm
  Fast Idle (Separator Engaged) 9450 2350 rpm
    9550 and 9650 2340 rpm
  Full Load Rated Speed 9450, 9550 and 9650 2200 rpm
Separator Drive Shaft Speed 1546 rpm
Main Countershaft Speed 1546 rpm
Cylinder Speed:
  High Range 9550 and 9650 480-980 rpm
  Low Range 9550 and 9650 240-480 rpm
  Grain Special 9450, 9550, 9650 470-960 rpm
  Edible Bean 9550 and 9650 150-250 rpm
  Extended Single Range 9450 300-980 rpm
  Extended Dual Range 9450 (High Range) 310-1000 rpm
  Extended Dual Range 9450 (Low Range) 150-480 rpm
     
Feeder House Lower Shaft:
  Standard Variable Speed 520-780 rpm
  High Capacity Variable Speed 520-740 rpm
Secondary Countershaft 530 rpm
Cleaning Fan:
  Standard 750-1600 rpm
  Optional 500-1100 rpm
Clean Grain Elevator 400 rpm
Tailings Elevator 430 rpm
Shoe Crankshaft 280 rpm
Straw Walkers 170 rpm
Unloading Auger Countershaft 1060 rpm
Loading Auger:
  9450 and 9550 430 rpm
  9650 430 rpm
Inner Grain Tank Unloading Augers:
  Front 9450, 9550 and 9650 405 rpm
  Rear 9450, 9550 and 9650 390 rpm
Vertical and Horizontal Unloading Augers: (9450, 9550, 9650)
  Vertical High 440 rpm
  Vertical Low 360 rpm
  Horizontal High 405 rpm
  Horizontal Low 390 rpm
Straw Chopper:
  Low (Corn) 1200 rpm
  High (Grain) 2100 rpm
Fine Cut Straw Chopper (Optional) (Grain and Rice Combines):

 

OUO6075,0000117 -19-29NOV00-2/3

  Low speed 1200 rpm
  High speed 2500 rpm
Straw Spreader Shaft 235 rpm
Shoe Grain Supply Augers Shaft 405 rpm

 

OUO6075,0000117 -19-29NOV00-3/3