Feeder House Top Shaft Stripper Adjustment

If the top feeder house shaft should wrap, check to see that the strippers are adjusted as follows:

Remove top feeder house door.

Loosen bolts (A) and set stripper (B) to 3 mm (1/8 in.) (C) from top shaft (D).

Specification

Stripper Location -Distance 3 mm (1/8 in.)

Tighten bolts (A) and replace top door.

H59570


A-Bolts
B-Stripper
C-Dimension 3 mm (1/8 in.)
D-Top Shaft

OUO6075,0000123 -19-01DEC00-1/1