A-Dipstick
B-Oil Fill

C-Lower Sight Glass
D-Upper Sight Glass

E-Coolant Low Mark

F-Moisture Sensor

1. Engine oil - Check oil level at dipstick (A). Do not operate engine with oil level below "ADD" mark. Add oil at (B) as needed.

2. Hydrostatic/Hydraulic Oil - Check with header on ground.

Oil level must be above lower sight glass (C) and below top of upper sight glass (D). Add oil as needed.

3. Recovery Tank - Check coolant level with engine cold, level must be up to the "COLD" mark (E).

4. Moisture Sensor. Clean out moisture sensor (A) when operating in weedy or green crops. In normal conditions cleanout at 50 hours.

OUO6075,0000127 -19-01DEC00-1/1