1. Recirculating Filter-Remove tray, reach in and lift out filter. Clean or replace filter. Check to be certain air flow arrow points toward front of combine.

2. Conveyor Auger Drive Slip Clutch-Do not over grease.

3. Reverser Gear Case-Raise feeder house and lower safety stop. Oil level must show on knurled part of dipstick.

Add oil as needed.

4. Air Conditioning Sight Glass-If there are bubbles in the sight glass after the compressor has run for 30 seconds or more, see your John Deere dealer.

5. Rear Axle (2 places).

OUO6075,0000129 -19-01DEC00-1/1