1. Engine Crankcase Filter-Remove old filter (A) and seal. Coat new seal with oil and install new filter. Turn handle (B) to drain.

Pull cap to fill. Check oil at dipstick (C) after filling.

IMPORTANT: Change oil every 100 hours if fuel is more than 0.5% sulfur.

Change oil every 250 hours when using TORQ-GARD SUPREME ® PLUS-50 ® .

IMPORTANT: Do not operate engine with oil level below low mark on dipstick.

2. Engine Fan Hub

3. Front and Rear Straw Walker Bearings.

TORQ-GARD SUPREME is a trademark of Deere & Company.
PLUS-50 is a trademark of Deere & Company.

OUO6075,000012A -19-01DEC00-1/1