A-Drain Hole
B-Cap

C-Plug
D-Sump

E-Tube
F-Drain Hole

G-Arrow

1. Hydraulic/Hydrostatic Reservoir-Drain at (A). Clean screen and cap (B) and refill. Oil must show above lower sight glass and below top sight glass.

2. Engine Gear Case-Drain at plug (C). Clean breather on dipstick. Clean screen in sump at (D). Refill at tube (E).

3. Dual Range Gear Case-Drain at (F). Check new oil level with arrow (G) up. Do not get oil on belts.

OUO6075,000012D -19-01DEC00-1/1