Adjusting Clean Grain Elevator Chain

Loosen nuts (A).

Loosen nuts (B) and (C).

Adjust nut (B) to adjust chain.

Elevator chain is adjusted properly when lower end of chain can be slid across the sprocket or can be pulled 6 mm (1/4 in.) away from the sprocket.

Tighten nuts (C) and (A).

NOTE: When the clean grain elevator adjustment has reached the end of the slot, remove one full link and add one half link. Removing a full link can result in difficulty in reattaching the chain ends.

A-Nuts
B-Nuts
C-Nuts

OUO6075,000013F -19-01DEC00-1/1