Specifications

Specifications given in this manual are intended for service only and do not include normal factory manufacturing tolerances.

Rigid Cutterbar Platform Model Cutting Width Gathering Width Combine Model
918 5334 mm (17 ft. 6 in.) 5.5 m (18 ft) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
920 and 920 Rice 5944 mm (19 ft. 6 in.) 6.1 m (20 ft.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
922 and 922 Rice 6556 mm (21 ft. 6 in.) 6.7 m (22 ft.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
925 and 925 Rice 7620 mm (25 ft.) 7.8 m (25 ft. 6 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
930 and 930 Rice 8992 mm (29 ft. 6 in.) 9.1 m (30 ft.) 7720, 8820, 9500, Sidehill 9500, CTS, 9600, 9510, Sidehill 9510, CTS 2, 9610, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines

 

900CP,SP,A -19-09JAN98-1/3

Flex Cutterbar Platform Model Cutting Width Gathering Width Combine Model
915 4572 mm (15 ft.) 4.5 m (14 ft. 11 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
918 5334 mm (17 ft. 5 in.) 5.3 m (17 ft. 5 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
920 5944 mm (19 ft. 6 in.) 5.9 m (19 ft. 5 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
922 6554 mm (21 ft. 6 in.) 6.6 m (21 ft. 5 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
925 7620 mm (25 ft.) 7.6 m (24 ft. 11 in.) 6620, Sidehill 6620, 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines
930 8992 mm (29 ft. 6 in.) 9.0 m (29 ft. 5 in.) 7720, 8820, 9400, 9500, Sidehill 9500, CTS, 9600, 9410, 9510, Sidehill 9510, CTS 2, 9610, 9450, 9550, Sidehill 9550, 9650, 9650 CTS, 9650 STS, and 9750 STS Combines

 

(Specifications and design subject to change without notice.)

900CP,SP,A -19-09JAN98-2/3

Cutterbar:
Type Enclosed wobble drive
Extension (rigid) 102 mm (4 in.) forward and 102 mm (4 in.) rearward 203 mm (8 in.) max.
Tilt range 9 degrees
Flexible cutterbar float range 90 mm (3-1/2 in.)
Cutterbar length 152 mm (6 in.) less than platform width, except for 915 and 925 models
Knife sections Heavy-duty, overserrated
Guards Forged steel, heat-treated
Knife Speed: (measured at sheave rpm)  
539 cpm on Flexible Platforms  
562 cpm on Rigid Platforms  
Reel: (pickup)  
Number of slats 6 (with DURA-FLO fingers)
Diameter 1067 mm (42 in.)
Reel: (slat)  
Number of slats 5
Diameter 1016 mm (40 in.)
Reel Controls:  
Height control Hydraulic
Speed control Hydraulic
Operating speeds (Pickup 5-44 rpm) (Slat 8-66 rpm)
Platform Auger:  
Diameter 610 mm (24 in.)
Operating speed 169 rpm std.
  135 rpm opt.

 

NOTE: (Specifications and design subject to change without notice).

900CP,SP,A -19-09JAN98-3/3