Calibration Codes
NOTE:
The condition causing the error must be corrected before the calibration can be continued.
If any errors occur during the calibration procedures, error codes will be displayed on the triple display tachometer.
Calibration Errors: Header sensors must operate or have output signals within specified ranges required by the header controller in the combine. Error warnings will be displayed during header calibration if these specifications are violated. The sensor must be adjusted or additional trouble shooting will need to be performed in order to correct the error.
Height and Sensors: Row-crop heads have one sensor for controlling height.
There are no adjustments for this sensor. Error codes on sensor indicate failed parts or other problems.
|