Locking-Out Flex Cutterbar PlatformThe flex cutterbar must be locked out before making adjustments and for rigid operation to harvest standing crops such as wheat or oats.
Raise platform to maximum height and lower safety stop. Starting at either end of platform, push up on skid plate (A). Install round head bolt, lock-out washer (B) and nut (C). Head of bolt must be to inside of platform for locked-out operation. Continue to lock out cutterbar with remaining lock-out washers. Tighten all nuts securely. |
|
CAUTION:
Always lower the safety stop when working under platform. Set parking brake, shut off engine and remove key.
900CP,FPA,A -19-18AUG97-1/1 |