OMH202732: 900 F and 900 R Series Cutting Platforms(695401- ), Block File: 900CP_SE_O_19

When operating a rigid platform with the cutterbar fully extended or in the mid position, idler (A) must be installed in hole (B).

When cutterbar on a rigid platform is in its rearward position, idler (A) must be installed in hole C).

On flex platforms, the idler must always be installed in hole (B).

A-Idler
B-Hole
C-Hole

900CP,SE,O -19-18AUG97-1/1