|
Moisture is too high.
|
Green plant sap or weed seed buildup on moisture sensor plates.
|
Clean moisture sensor plates,
|
|
|
Sensor not full.
|
Harvest unit sensor is full.
|
|
Moisture is consistently high or low.
|
Moisture correct needs adjustment.
|
Change moisture correction.
|
|
Moisture does not change
|
Obstruction is sensor. Paddle wheel has stopped turning.
|
Remove moisture sensor cover and inspect the paddle wheel.
|
|
Moisture reading is inaccurate.
|
Incorrect crop selected.
|
Select correct crop on the GREENSTAR display.
|
|
Moisture always zero
|
Harness connection to sensor not connected.
|
Check harness and connectors.
|