Mass Flow Sensor (CTS Combine)-Every 50 Hours

Open grain tank covers.

Release clamps (A) and open side elevator inspection door. Check mass flow sensor for foreign material build-up on plastic wear plate (B).

In severe conditions, such as mud from edible bean harvest or green weed residue buildup in soybeans, check wear plate for residue buildup on a DAILY basis.

A-Clamps
B-Wear Plates

OUO6075,00021FF -19-03JUL02-1/2

Remove front cover (A) and inspect for grain buildup and grain wedging between mass-flow sensor and clean grain elevator housing.

A-Front Cover

OUO6075,00021FF -19-03JUL02-2/2