RUN - Yield Map - PAGE 2

NOTE: While harvesting, it is recommended that the operator keep a "key" of what farm and field corresponds to which Farm/Field name and keep it in your combine for reference.

The RUN - Yield Map - PAGE 2 screen displays the following information:

NOTE: Make certain that the correct farm is displayed.

This cell shows the name of farm being harvested. The farm was previously set up in desktop software and saved on PC Card.

NOTE: Make certain that the correct field is displayed.

This cell displays name of field being harvested. Field was previously setup in desktop software and saved on PC Card.

Productivity screen shows combine harvest productivity (field area units per hour).

Press B. Units will toggle between area units per hour and yield units per hours.

This cell shows total field area harvested.

OUO6075,00022B2 -19-31JUL02-1/2

This screen shows the seed variety currently selected in RUN - Variety - PAGE 1.

Press D to go to RUN - Variety - PAGE 1 screen.

RUN - Variety - PAGE 1 display seed varieties entered in desktop software setup and saved onto PC Card before harvesting.

Before harvesting a particular variety, press corresponding letter key to select desired variety. This will turn variety ON and all data saved will be marked with this variety name. in the RUN - Variety - PAGE 1 sample screen, the variety name PIONEER 3394 is turned ON. The RUN - Yield Map - PAGE 2 screen will show the same name.

See Field/Variety Summary Report from desktop software Users Manual.

OUO6075,00022B2 -19-31JUL02-2/2