Field

NOTE: For the purpose of yield mapping, a field is composed of a single parcel of land.

The field screen shows a list of fields that are available. These fields were previously set up in desktop software and saved PC Card.

To select field being harvested:

OUO6075,00022B5 -19-31JUL02-1/3

NOTE: If the desired field is not displayed on the correct screen, press PAGE until the desired field appears.

2. Press letter button corresponding to desired field. Field selected is the one NOT highlighted in black.

After correct field is selected, SETUP - Yield Map - PAGE 1 will appear.

OUO6075,00022B5 -19-31JUL02-2/3

NOTE: Fields not previously set up in desktop software may be harvested as UNDEFINED. To do so, press letter button next to UNDEFINED.

3. A number can be assigned to each unidentified field on SETUP - Yield Map - Undefined FIELD screen. Using numeric keypad, input number of field to be harvested. Each field MUST be identified by a different number. Fields can be renamed when unloading PC Card into desktop software.

4. Press C to accept value, then SETUP - Yield Map - PAGE 1 will appear or press G to return to SETUP - Yield Map - PAGE 1.

OUO6075,00022B5 -19-31JUL02-3/3