Field

NOTE: For the purpose of GREENSTAR, a field is composed of a single parcel of land made up of a single crop.

EXAMPLE: Deere Farm would be Farm 1. If it had two fields, North and South, you would identify North Field as Field 1 and South Field as Field 2. When referring to Farm 1 - Field 1, you would be referring to the Deere Farm, North Field. It is recommended that the operator keep a "key" of what farm and field correspond to which Farm/Field number.

NOTE: To save new farm, field and crop settings, the combine must harvest with separator engaged, header down and engaged, and engine at full rpm for at least 60 seconds and for one-tenth of an hectare.

Once this has been completed, the crop settings CANNOT be changed for that particular field unless crop totals are cleared for this field.

1. Press C on SETUP - Yield Mon - PAGE 1. SETUP - Yield Mon- Undefined FIELD screen will appear.

2. Using numeric buttons, input number of field to be harvested. Each field must be identified by a different number.

OUO6075,00022C9 -19-31JUL02-1/2

OUO6075,00022C9 -19-31JUL02-2/2