OMH205952: GREENSTAR™ Yield Monitor System and Yield Mapping System, Block File: OUO6075_00022E9_19

GREENSTAR Display

NOTE: The display is used to select the backlight level, the type of measurement (English or Metric) and/or language (English, French, German, or Spanish) for the yield monitoring and other screens.

To view display, press letter key next to GREENSTAR display. SETUP - Display - PAGE 1 screen will appear.

Backlight Choice

To select DAY backlight or NIGHT backlight, press A. Black arrow will toggle between SELECT NIGHT and SELECT DAY.

Day Backlight

Press B to change to DAY backlighting level. Using numeric keypad, enter any number from 0 to 9 for intensity level. The higher the number the brighter the screen.

Night Backlight

Press C to change the NIGHT backlighting level. Using numeric keypad, enter any number from 0 to 9 for intensity level. The higher the number the brighter the screen.

OUO6075,00022E9 -19-06AUG02-1/3

Display Address

IMPORTANT: If machine is turned on and Performance Monitor is displayed, check to see that the display is set to Primary. If not, change to Primary and cycle power. Yield Monitor should work correctly when power is turned on.

NOTE: DO NOT select Auxiliary 1, Auxiliary 2 or Auxiliary 3. These selections do not apply to the combine yield monitor application.

1. Press letter button next to GREENSTAR display to access SETUP - Display.

2. Press D on SETUP - Display. SETUP - Display Address screen will appear.

OUO6075,00022E9 -19-06AUG02-2/3

3. Press A to select Primary for this application. Selection will appear boxed in capital letters.

4. Press G to return to SETUP - Display.

OUO6075,00022E9 -19-06AUG02-3/3