INFO - Software

This screen will allow the operator to go directly to a screen to reprogram the mobile processor, moisture sensor, position receiver, and GREENSTAR ™ display.

NOTE: New software must be present in the proper location on the PC Card in order to be loaded.

Press letter button next to Reprogram.

GREENSTAR is a trademark of Deere & Company

OUO6075,0002301 -19-13AUG02-1/3

The INFO-Software page shows detailed information about the software. This information will help troubleshoot if a problem occurs with display, position receiver or moisture sensor software.

This cell shows part number of software being used by the mobile processor.

This cell shows the part number of software being used by the GREENSTAR display.

This cell displays the version of software being used by the position receiver.

This cell shows the part number of software being used by the moisture sensor.

OUO6075,0002301 -19-13AUG02-2/3

NOTE: The number of programs displayed on the program target screen depends upon how many were loaded on the PC Card.

Press G on INFO - Software screen. Program target screen will appear.

This screen allows operator to update software for the mobile processor, display, position receiver, and moisture sensor.

OUO6075,0002301 -19-13AUG02-3/3