Yield Monitor SETUP Functions

The SETUP mode is used to select screens for changing specific information. To select SETUP, press SETUP button.

First screen displayed will be SETUP. From SETUP screen, YIELD MONITOR, GREENSTAR display, RUN Page Layout and Tracking screens can be selected. Refer to the following pages for setup of each of these screens.

There are three screens (PAGE 1, PAGE 2 and PAGE 3) used to setup the yield monitor system. Press letter key next to Yield Monitor to access screens.

Press PAGE button to toggle through pages.

Tracking function may appear on the SETUP screen.

The TRACKING function is not used in the yield monitor system.

IMPORTANT: STARFIRE ™ Receiver will be labeled as STARFIRE Receiver.

Position Receiver may appear on this screen if a position receiver has been installed.

STARFIRE is a trademark of Deere & Company

OUZXMAG,000126D -19-18OCT01-1/1