SETUP - Yield Map - PAGE 3

SETUP - Yield Map - PAGE 3 is a continuation of SETUP - Yield Map - PAGE 2.

IMPORTANT: Zero all fields and crops once a year before harvest. Current field and crop will remain the same.

NOTE: Data being cleared is the cumulative Crop Totals and cumulative Field Totals displayed in "INFO" section.

This function clears all cumulative data. Press A to reset all data display cells to zero.

Press B to enter receiver subscription renewal code for receiving GPS differential correction signal. (See "RENEW POSITION RECEIVER LICENSE" in this section).

NOTE: If the time cannot be reset, check to make sure position receiver is connected. If the position receiver is connected and the time still cannot be reset see your John Deere dealer. Position receiver must be locked onto GPS to enable time to be changed.

To change display clock time on RUN PAGE screen press C until correct time appears.

To select the combine model press D until the desired model is displayed.

Select:

• "225X" for 5-straw walker Z-Series combine model.
• "226X" for 6-straw walker Z-Series combine model.
• "CTS-E" for CTS combine up to SN 070230
• "9650CTS" or "CTS2000" for CTS combine from SN 070231 to 072799

OUZXMAG,00012BC -19-18OCT01-1/2

• "9780CTS" for CTS combine from SN 072800
• "9540, 9640, 9560, 9660, 9580 or 9680" for WTS and CWS combines
• "9880STS" for STS combine

OUZXMAG,00012BC -19-18OCT01-2/2