OMH205952: GREENSTAR™ Yield Monitor System and Yield Mapping System, Block File: OUZXMAG_00012C3_19

NOTE: This option is only available on dual CAN displays.

SETUP - Display - PAGE 2 screen is a continuation of SETUP - Display - PAGE 1 screen.

OUZXMAG,00012C3 -19-18OCT01-1/4

CAN Physical Layer

IMPORTANT: It is best to leave this option set to AUTO. If incorrectly set, the display may not operate.

1. Press A on SETUP - Display - PAGE 2. SETUP - CAN Physical Layer screen will appear.

OUZXMAG,00012C3 -19-18OCT01-2/4

2. Press letter key corresponding to the desired layer. Selected CAN Physical Layer will appear boxed in capital letters.

OUZXMAG,00012C3 -19-18OCT01-3/4

3. Warning screen appears when changing CAN physical layer.

4. Press E to change CAN physical layer. New CAN physical layer will appear on SETUP - Display - PAGE 2 under CAN Physical Layer.

5. Press G to cancel change and return to SETUP - CAN Physical Layer screen.

OUZXMAG,00012C3 -19-18OCT01-4/4