Specifications-Flex Platforms
|
|
| Cutterbar: |
| Type |
4-in. Knife System with In-Line Gearbox |
| Cutterbar Angle |
10 degrees |
| Cutterbar Length |
5.5 m, 6.1 m, 6.7 m, 7.6 m, 9.2 m, 10.7 m (18 ft, 20 ft, 22 ft, 25 ft, and 30 ft, 35 ft) |
| Flex Cutterbar Float Range |
152.4 mm (6.0 in.) |
| Tilt Adjustment |
17 degrees (located on feederhouse) |
| Knife Sections |
Heavy-duty, overserrated |
| Guards |
Forged steel, heat-treated |
| BackShaft Speed: |
520 rpm |
| Knife Speed: |
635 F; 505 cycles/min
All Others; 520 cycles/min |
| Platform Auger: |
|
| Diameter |
660 mm (26 in.) |
| Operating speed |
152 rpm
135 rpm (slow down)
170 rpm (speedup) |
| Reel: |
|
| Number of slats |
6 |
| Diameter |
1,067 mm (42 in.) |
| Reel Controls: |
|
| Height Controls |
Hydraulic |
| Speed control |
Hydraulic |
| Operating speeds |
6-44 rpm |
| Hydraulics |
| Reel Motor Displacement (Per Revolution) |
0.196L (11.9 cu in.) |
| Reel Drive System Pressure |
14000 ± 1000 kPa (2000 ± 150 psi) |
| Reel Fore/Aft Stroke |
359 mm (14.1 in.) |
|
|
OUO6091,000165B -19-19MAY03-1/1
|
|