When to Calibrate
Calibration procedures must be performed before first use, replacing any of the sensors, or changing concaves.
-
Concave Sensor Zero Calibration - conc
-
Header Calibration - hdr
-
CONTOUR MASTER Angle Sensor Calibration - tilt (Optional)
-
Hydraulic Adjustable Deck Plate (optional) Sensor Calibration - dEc
-
Active Float Calibration - FLO
NOTE:
The condition causing the error must be corrected before the calibration can be continued.
If any errors occur during the calibration procedures, error codes will be displayed on the triple display tachometer.
|