Batteries-Removing and Installing

causym CAUTION: Avoid falls from ladder. Do not attempt to carry battery up or down rear service ladder. Hand battery to another person, or place battery on service platform and handle from the ground.

1. Disconnect negative (-) cable (B) and then disconnect positive (+) cable (A).

2. Remove battery clamp (C) to remove batteries.

3. Clean batteries and battery mounting area.

4. Install batteries using clamp.

5. Clean battery cables and posts.

6. Attach positive cable (+) to battery then negative cable (-) to battery.

H41335


A-Positive Cable
B-Negative Cable
C-Clamp

OUO6075,0002645 -19-27JAN03-1/1