OUO6075,0002B3C -19-17APR03-1/2

2. Conveyor Auger Drive Slip Clutch. Rotate sheave assembly for fitting access. DO NOT OVER GREASE.

3. Right-Hand Side Lube Bank. Lubricate primary countershaft bearing (A) and STS separator bearing (B).

4. Feed Accelerator Bearing. Rotate sheaves for access to fitting.

5. Discharge Beater Bearing (both sides). Lube one fitting.

6. Cleaning Fan Shaft Bearings (both sides). Lube one fitting.

7. Rear Axle (both sides). Lube one fitting on power steering rod end ball joint.

8. Spreader Disk (both sides). Lubricate one fitting to prevent hubs from corroding to shafts.

OUO6075,0002B3C -19-17APR03-2/2