| Dimensions |
9560 STS
800/70R38 R1 Front Tires and 600/65R28 R1 Rear Tires |
| A |
8.36 m (27 ft. 4 in.) w/ 4.80 m (15 ft. 7 in.) Unload Auger
9.31 m (30 ft. 5 in.) w/ 5.64 m (18 ft. 5 in.) Unload Auger
10.22 m (33 ft. 5 in.) w/ 6.55 m (21 ft. 5 in.) Unload Auger |
| B |
8.36 m (27 ft. 4 in.) |
| C |
4.46 m (14 ft. 6 in.) |
| D |
4.02 m (13 ft. 2 in.) w/ 7750 L (220 bu.) Extensions
4.16 m (13 ft. 6 in.) w/ 8850 L (250 bu.) Extensions |
| E |
3.88 m (12 ft. 7 in.) |
| F |
0.57 m (1 ft. 9 in.) |
| G |
3.53 m (11 ft. 6 in.) |
| H |
5.30 m (17 ft. 4 in.) w/ 4.80 m (15 ft. 7 in.) Unload Auger
6.19 m (20 ft. 3 in.) w/ 5.64 m (18 ft. 5 in.) Unload Auger
7.05 m (23 ft. 1 in.) w/ 6.55 m (21 ft. 5 in.) Unloading Auger |
| I |
4.56 m (15 ft. 0 in.) w/ 4.80 m (15 ft. 7 in.) Unload Auger
4.78 m (15 ft. 7 in.) w/ 5.64 m (18 ft. 5 in.) Unload Auger
4.99 m (16 ft. 4 in.) w/ 6.55 m (21 ft. 5 in.) Unload Auger |
| J |
3.97 m (13 ft. 0 in.) w/ 4.80 m (15 ft. 7 in.) Unload Auger
4.19 m (13 ft. 7 in.) w/ 5.64 m (18 ft. 5 in.) Unload Auger
4.41 m (14 ft. 5 in.) w/ 6.55 m (21 ft. 5 in.) Unload Auger |
| Ka |
3.98 m (13 ft. 1 in.) w/ 4.80 m (15 ft. 7 in.) Unload Auger
4.21 m (13 ft. 8 in.) w/ 5.64 m (18 ft. 5 in.) Unload Auger
4.43 m (14 ft. 15 in.) w/ 6.55 m (21 ft. 5 in.) Unload Auger |
| L |
Refer to Ground Drive and Rear Axle Section b |
| M |
Refer to Ground Drive and Rear Axle Section c |
- For 18.4R38*** R1 Duals and 480/80R38 (149A8) R1, subtract 141 mm (5.6 in.)
- For 20.8R38** R1 Duals and 520/85R38 (155A8) R1, subtract 103 mm (4.1 in.)
- For 30.5L-32 14PR R1, subtract 111 mm (4.4 in.)
|
- For 30.5L-32 14PR R2, subtract 82 mm (3.2 in.)
- For 30.5LR32*** R1, subtract 118 mm (4.7 in.)
- For 800/65R32 (172A8) R1W, subtract 93 mm (3.7 in.)
|
| aDimension is measured 1.22 m from grain spill point. This represents the unloading auger when centered over the grain cart. |
| bSee Front Tire Selection, Header Compatibility, Final Drives, Row Spacing Charts in Ground Drive and Rear Axle Section for specific dimensions. |
| cSee Rear Tire Selection, Tire Spacing, and Front to Rear Tire Compatibility Charts in Ground Drive and Rear Axle Section for specific dimensions. |